Champion Gasket Style AF 110

Compressed Fibre Gasket For Low Service Applications

Organic cellulose fibres bonded with elastomeric binders

Champion Style AF 110 is a high quality and reliable, yet, cost-effective product manufactured from eco-friendly natural cellulosic fibers bonded with suitable mix of elastomers.

Champion AF-110 Sheets are available in non-metallic and also in metallic option (with wire reinforcement). This grade is produced in brown color.

Applications :

Champion Jointing AF 110 Jointing for general purpose, medium performance duties. Preferred as gasket for liquid and gases in low internal pressure and temperature Suitable for flanges with low bolt loading conditions.

Service Media :

Corrosive / non-corrosive gases, steam, condensate, water, air, oils, solvents and a wide range of other media (low service conditions).

How Supplied :

Sheets, pre-cut gaskets, special density.thickness, shape or grade available on request.

Description
Standard Specs
Typical Values
Density
DIN 28090-2
1.75 g/cm3 - 1.9 g/cm3
Tensile Strength
ASTM F 152
≥7 MPa / 70 Bar (1015 psi)
Compressibility
ASTM F 36
8% - 13%
Residual Stress
BS 7531
≥22 MPa /220 Bar (3190 psi)
Gas Permeability
BS 7531
<0.5 cc/min
Recovery
ASTM F 36
≥45%
Water Absorption
BS 7531
≤5%
Ignition Loss
DIN 52911
≤40%

Available Sheet
Sizes in mm
(+/- 5%)
1600 mm x 1500 mm
1500 mm x 2000 mm
1600 mm x 4500 mm
2000 mm X 6000 mm
Thickness(mm) 0.4/0.5 mm: 0.75/0.8 mm; 1.0 mm; 1.5 mm; 2.0 mm; 3.0 mm; 4.0 mm; 5.0 mm

Weight Increase ASTM Oil No.3 : 5hr/150°C(300°F) <10%
ASTM Fuel B : 5hr/23°C(73.4°F) <10%
Thickness Increase ASTM Oil No.3 : 5hr/150°C(300°F) <10%
ASTM Fuel B : 5hr/23°C(73.4°F) <10%